Showing posts with label bolger. Show all posts
Showing posts with label bolger. Show all posts

Saturday, June 11, 2011

She Floats!

If you take a look of the pictures from earlier today the boat floats, the motor runs and all is right with the world. We had a lit of fun at turkey creek on the boats maiden voyage. I did have a moment of panic about five minutes in when I Noticed we had a little bit of water in it. Maybe a cup or two total. I kept watching it and no more came in so it must have come in when I got into the boat. We were out for over an hour and not a single problem developed other than a few spots in the paint. I hate painting so I wasn't surprised. I am really glad about using the 6oz cloth and totally fiberglassing the hull. It really paid off on the boat ramp. Still some finish work to do when the winter gets here, but for now we are just going to fish(I'll have to learn this one), have fun, and enjoy her. Thanks everyone for following me on my journey, we will keep posting pics of where we take her and anything that I change.

Tuesday, May 24, 2011

Cartopper is ready to float.

Still a few little things left to do, but we will take it out this weekend whether they are done our not.



Monday, May 16, 2011

Sunday, May 15, 2011

Interior painted

Thanks to the wonderful work of my wife the interior of the boat has finally been painted. I'll post a picture tomorrow.

Saturday, May 7, 2011

Still building

It has been a busy week, but I am still building the cartopper. Just putting the finishing touches on the interior. namely building the seats.  Instead of having a removable seat I decided on two permanant ones attached to the side panels with t-88 epoxy. I am also going to build a provision for a mast just in case I decide to build a centerboard and sail it.

Thursday, April 28, 2011

Done with rails.

The title says it all. No more woodworking left to do. I'm lO a little sad about that. I just have a little finish work and some sanding. I think the boat weighs right at 90 pounds right now. So I think I'll make a boat dolly since I'm going to use a utility trailer to haul it.

I'm already getting comments on how pretty the boat is from neighbors. They asked where they could get a boat like that too. I said the lumber yard.


Wednesday, April 27, 2011

Rubrail attached

I used stainless ring shank nails every six inches to attach the rub rails


Tuesday, April 26, 2011

Interior sealed

Finished sealing the interior of the boat. I need to scarf the rub rails, attach them and paint the inside.


Friday, April 22, 2011

New motor.

This is my new 1965 Johnson seahorse 3hp motor. results of the leakdown test were 3%. New recoil, rebuilt carb, new points, perfectly clean fuel tank. Starts the first time every time. Thanks Dad!!!!! He found it in Maryland, bought it, had it shipped to his house, and did a cosmetic restoration. Needless to say a big thank you is in order.

Tomorrow, the boat will be flipped again. The interior will be sealed and primed. the deck will be completed along with the bow seat.. i will also make some corner knees. Tuesday, the final paint will be applied, rubrails stained and installed plus any small details taken care of that I may have missed. I will also get a home-built title, and register the boat. I am unbelievably excited for my first launch. It should float just fine.

Sunday, April 17, 2011

Primed

Almost ready to paint. Just have to smooth out the primer a bit still. So more sanding.



Friday, April 8, 2011

Skeg is on

Well tonight i managed to get the skeg attached. It didn't go perfectly, but will work just fine. It is on straight but just a little less than 1/16" out of square. I didn't realize it until after the glue dried. However I highly doubt that I will be able to tell in any kind of current. I didn't bother planing it down until after I installed it and the glue dried so here is a before picture:




Look that's me. In the middle of the night.

Tuesday, April 5, 2011

The Cost of Cartopper

Today I finally fiberglassed the hull of my bolger cartopper. I've been dreading this day since the start, but now that i'm finished it wasn't really that big of a deal. I did it in two pieces, one on the port and other starboard. I overlapped the middle by about four inches. Then i started on the bilge panel working from the transom forward, moved on to the bottom panel, then the side panel. On the whole boat I had 1 very small bubble that I sanded through and puttied. My next step is one more coat of resin, building and attaching the stem, priming, painting, then finishing off the interior bits and rub rails.

Total cost so far. $243.68 plus a bit of gas.
I'll spend maybe another $50 to finish it between paint and 3 pieces of wood.

Friday, April 1, 2011

Sealed

Tonight I went ahead and sealed the hull. I also went by bateau.com and picked up some fiberglass. Joel was nice and told me about some of their boats. I really decided that I'll wait on the sailboat in favor of a runaboat. Its just hard to find any good quality wood around here. So it looks like the next build will be a rb14, but not until I can get the shop finished the way I want to.


Sunday, September 26, 2010

Cartopper Progress

It hasn't been long since I decided to build a bolger cartopper before continuing on the minuet. Well, it looks like this is going to be a pretty quick build. Thus far I have the bits of plywood joined together, The bottom panel, rudder,  and frames marked and ready to be cut out. Which took all of 10 hours to do, including lunch and waiting for resin to dry. So I have a total of maybe 4-5 hours into the project. Honestly, If I were to choose a design again it would definitely be a boat that includes measurements for every piece like the cartopper does. Tracing the plans makes it really easy to make small errors that just keep getting magnified as the build continues. I have a lot of hours to work this week again(50-60). So, I doubt 'll do anything else with the boat for the rest of the week. I will try for progress pictures tomorrow.