Showing posts with label bolger cartopper. Show all posts
Showing posts with label bolger cartopper. Show all posts
Saturday, June 11, 2011
She Floats!
If you take a look of the pictures from earlier today the boat floats, the motor runs and all is right with the world. We had a lit of fun at turkey creek on the boats maiden voyage. I did have a moment of panic about five minutes in when I Noticed we had a little bit of water in it. Maybe a cup or two total. I kept watching it and no more came in so it must have come in when I got into the boat. We were out for over an hour and not a single problem developed other than a few spots in the paint. I hate painting so I wasn't surprised. I am really glad about using the 6oz cloth and totally fiberglassing the hull. It really paid off on the boat ramp. Still some finish work to do when the winter gets here, but for now we are just going to fish(I'll have to learn this one), have fun, and enjoy her. Thanks everyone for following me on my journey, we will keep posting pics of where we take her and anything that I change.
Monday, May 16, 2011
Sunday, May 15, 2011
Interior painted
Thanks to the wonderful work of my wife the interior of the boat has finally been painted. I'll post a picture tomorrow.
Saturday, May 7, 2011
Still building
It has been a busy week, but I am still building the cartopper. Just putting the finishing touches on the interior. namely building the seats. Instead of having a removable seat I decided on two permanant ones attached to the side panels with t-88 epoxy. I am also going to build a provision for a mast just in case I decide to build a centerboard and sail it.
Thursday, April 28, 2011
Done with rails.
The title says it all. No more woodworking left to do. I'm lO a little sad about that. I just have a little finish work and some sanding. I think the boat weighs right at 90 pounds right now. So I think I'll make a boat dolly since I'm going to use a utility trailer to haul it.
I'm already getting comments on how pretty the boat is from neighbors. They asked where they could get a boat like that too. I said the lumber yard.
Wednesday, April 27, 2011
Tuesday, April 26, 2011
Interior sealed
Finished sealing the interior of the boat. I need to scarf the rub rails, attach them and paint the inside.
Friday, April 22, 2011
New motor.
This is my new 1965 Johnson seahorse 3hp motor. results of the leakdown test were 3%. New recoil, rebuilt carb, new points, perfectly clean fuel tank. Starts the first time every time. Thanks Dad!!!!! He found it in Maryland, bought it, had it shipped to his house, and did a cosmetic restoration. Needless to say a big thank you is in order.
Tomorrow, the boat will be flipped again. The interior will be sealed and primed. the deck will be completed along with the bow seat.. i will also make some corner knees. Tuesday, the final paint will be applied, rubrails stained and installed plus any small details taken care of that I may have missed. I will also get a home-built title, and register the boat. I am unbelievably excited for my first launch. It should float just fine.
Tomorrow, the boat will be flipped again. The interior will be sealed and primed. the deck will be completed along with the bow seat.. i will also make some corner knees. Tuesday, the final paint will be applied, rubrails stained and installed plus any small details taken care of that I may have missed. I will also get a home-built title, and register the boat. I am unbelievably excited for my first launch. It should float just fine.
Sunday, April 17, 2011
Friday, April 15, 2011
Sanding.
Thought I would give a quick update for today. Sanding, sanding, sanding. Really, I feel like it'll never get painted. Just need to remember this is a little boat, not a show boat. I actually want to use it one day. So this is my plan:
Finish getting everything smoothed out
Two coats of primer
sand
two coats of paint
wet sand
wash
two coats of paint
wet sand
wash
rubbing compound
wash
polish
wash
wax
This week is gonna be tons of fun getting the cartopper finished.
I really have to thank my wife for doing the fill work. It's my least favorite part and she is much better at it than me.
Finish getting everything smoothed out
Two coats of primer
sand
two coats of paint
wet sand
wash
two coats of paint
wet sand
wash
rubbing compound
wash
polish
wash
wax
This week is gonna be tons of fun getting the cartopper finished.
I really have to thank my wife for doing the fill work. It's my least favorite part and she is much better at it than me.
Friday, April 8, 2011
Skeg is on
Well tonight i managed to get the skeg attached. It didn't go perfectly, but will work just fine. It is on straight but just a little less than 1/16" out of square. I didn't realize it until after the glue dried. However I highly doubt that I will be able to tell in any kind of current. I didn't bother planing it down until after I installed it and the glue dried so here is a before picture:

Look that's me. In the middle of the night.
Look that's me. In the middle of the night.
Sunday, October 31, 2010
Flipped!
I know. I need more pictures. It's late, so maybe tomorrow. To the point. The hull has been flipped, frames and seams are filleted. Now I just need to order some fiberglass tape so I can finish up building the hull and move on to all the fun stuff.
Saturday, October 23, 2010
Puttied!
Last Monday I was able to get everything puttied and the bow shaped. Now I just need to smooth over the rest of the seams, and fiberglass them tomorrow. Fun stuff!!
Monday, October 11, 2010
Parts to hull.
Today was the day! I started going from parts to a real boat with my bolger cartopper. So time for pics...
Now I have to attach frame a and fit the bilge panels.
Now I have to attach frame a and fit the bilge panels.
Sunday, October 3, 2010
Rapid Cartopper progress
The last time I posted about my progress on the cartopper all I had was some of the pieces drawn out and plywood together. Today was very very productive. I manages to cut out all the frames, the transom, bottom, 1-rudder cheek, 1 half of the rudder, the bilge and side panels. Everything looks like it will go together pretty well. Not too tight or too loose. Tomorrow I hope to get the transom and stem together. Then maybe I can build a framework to support everything so my dad and I can start the assembly process when they come to visit my wife and I next weekend.
Subscribe to:
Posts (Atom)

